Product Description:
This pump has a capacity of up to 300 Gallons Per Minute, a maximum of 160 feet of head pressure.

The p180 pump bolts directly on to a minimum 5.5 horsepower engine, up to a 6.5 horsepower engine, with a 5/8 inch threaded shaft.

This pump produces up to 300 Gallons Per Minute or more depending on the horsepower of the engine and up to 160 foot head. 2.5 inch intake slip fitting and a 2 inch NPT discharge. The pump will bolt directly to a variety of motors and brands running around 5.5 horsepower and higher, just be sure to match the proper shaft to pump. This pump also leaves enough room to adapt a 2 inch pulley between the engine and back plate to drive a air compressor or other accessories.

Having a direct mount pump greatly enhances the performance and reduces the weight. No couplers, adaptors, bulky base plate, just bolt it on.

Keene pumps provide superior performance over all other pumps. Keene pumps are also one of the only pumps that provide accessory pulley drive. This pump produces both a good balance of both volume and pressure.

Net weight 6 pounds

p180 pump: 2.5" x 2" thread
for 2.5" x 2" keyway: order p180K model 250 GPM Direct Mount Pump Keyed